How to mount and use your Seca Comp / Taz bike light?

MOUNTING - Mount to a handlebar with a simple but thoughtfully designed strap that cinches light to bar to prevent movement in bumpy terrain.

Step 1. Place light in desired potion on handle bar.

Step 2. Rotate light 90 degrees for easy access and feed strap through slot.

Step 3. Double back strap to lock the strap in place as tight as possible.

Step 4. Rotate light back to forward facing position and enjoy 1200-2000 lumens of light.

TURNING ON - All our lights are packaged in Travel Lock Out Mode, so the light isn't accidentally turned on. To unlock press and hold the power and mode buttons simultaneously for 4 seconds until the power button blinks green. Then push the power button to turn on and cycle through the 4 modes: High, Medium, Low & SafePulse. To turn on the amber side lights, push the mode button behind the power button. Press the button again to go from SafePulse mode to steady mode, press again to turn the side lights off.

RACE MODE - All of our bike lights have Race Mode which allows riders to toggle between high and medium with a push of a button.  This is useful to conserve battery power on technical rides - use medium when climbing, use high on descents.

To activate Race Mode, with the light off, hold the power button down for 2 seconds.  To deactivate, turn the light off.

TRAVEL LOCK OUT - Your light is in travel lock out mode.  Light & Motion incorporates this feature into all of our lights for storage and travel because there is nothing more frustrating than to pull your "charged" light out of the drawer or bag only to find it discharged.

To unlock, press and hold the power button & the mode button simultaneously for about 4 seconds. The indicator light will blink green 3 times.

To lock, when the light is on, press and hold the power button (clear) & the mode button (black) simultaneously for about 4 seconds. The indicator light will blink red 3 times.  Now it is safe to store your light.

Mounting & Travel Lock out Seca Comp & Taz Video

Race Mode: Seca Comp & Taz Video

How did we do?

Mounting the Seca and Stella lights on a Helmet Mount

Vis 180 Removal Tutorial

Contact